利来·国际最老牌官网

GM-602(W)
Epoxy dry hanging adhesive

1. Dry hanging bonding of internal and external walls of stone, ceramics, etc;

2. Assembly, bonding, and marking of prefabricated components such as concrete, ceramics, stone, wood, etc;

3. Repair of cracks in concrete, stone, and other materials;

4. Positioning, reinforcement, and reinforcement of the structure.

Product features

1. Epoxy two component room temperature curing;

2. High adhesive strength, good thixotropy;

3. Good weather resistance, cold and hot shock resistance;

4. Water and chemical resistance;

5. It can bond various materials such as stone, ceramics, glass, metal, wood, etc.

Product parameters
The following data is for reference only and is not recommended for specification development
Project Sample type/curing conditions Performance index (MPa) Reference standards
Tensile shear strength Stainless Steel - Stainless Steel/Standard Conditions ≥18 JC 887-2001
Epoxy adhesive for dry hanging stone curtain walls
Compressive shear strength Stone - Stone/Standard Conditions ≥12
Stone - Stone/freeze-thaw cycles 50 times ≥10
Stone - Stainless Steel/Standard Conditions ≥12
Attribute GM-602A GM-602B GM-602(After mixing well)

Color (appearance)
Grey paste White paste Pale
Density(g/cm³) ~1.8 ~1.8 ~1.8
Viscosity(PaS)* 200~400 150~250 Thixotropic
Effective operating time (23 ℃) N/A N/A Within 20 minutes
Shelf life (10-40 ℃) 1-2 years 1-2 years N/A
Standard conditions: temperature=23 ± 2 ℃, relative humidity=50 ± 5%, curing for 48 hours *Shear rate=12.9 [1/S], temperature=23 ℃, rotational viscometer method GB/T 2794-1995
Operation and Safety
  • 1. When using, mix thoroughly and evenly according to the recommended proportion. Excessive deviation in proportion or uneven mixing may cause yellowing or partial contamination of the stone:
  • 2. The epoxy resin and amine curing agents contained in this product are both chemicals. Safety precautions must be taken during construction to avoid eye or skin contamination. If skin contact occurs, timely wipe off pollutants and wash with water and soap; If eye contact occurs, rinse with clean water for 15 minutes. And seek medical attention in a timely manner;
  • 3. To ensure construction safety, do not bear weight during the initial curing stage of the adhesive;
  • 4. The recommended operating environment temperature for GM-602 is above 10 ℃. When the temperature is lower, it is recommended that users slightly heat the product before using it; Do not use in rainy or humid environments; 5. If you have any other questions, please contact the local distributor of the product or directly contact Zhijiang Company.
Color and packaging

Packaging 1. Component A: 15kg, Component B: 15kg

Packaging 2. Component A: 9kg, Component B: 9kg

Storage and expiration date

The separate storage period for the two components is 2 years. This product should be stored in a dry and ventilated place and promptly sealed after use.

Data download