利来·国际最老牌官网

GM-605 A/B
Modified stone adhesive (unsaturated resin type)
Product features

1. Two component room temperature rapid curing;

2. High adhesive strength and good mechanical properties;

3. No sagging, easy to operate;

4. Waterproof and resistant to chemical corrosion;

5. Suitable for a wide range of adhesive materials.

Product parameters
The following data is for reference only and is not recommended for specification development
Test items Test sample type Curing conditions Technical indicators(MPa)
Tensile shear strength Stainless steel - stainless steel Standard conditions ≥10
Bending modulus 4mm×15mm×80mmspline Standard conditions ≥3000
Compressive shear strength Stone - Stone Standard conditions ≥10
Stone - stainless steel Standard conditions ≥10

*Reference standard: JC887-2001 "Epoxy adhesive for dry hanging stone curtain walls"

* Standard conditions: temperature 23 ± 2 ℃, relative humidity 50 ± 5%,

Attribute Component A Component B ComponentA/B
Color (appearance) Dark yellow paste White paste Dark yellow
Density (g/cm³) ~2.0 ~1.9 ~2.0
Viscosity(PaS)* 150-200 8~15 Thixotropic
Effective operating time(23℃) N/A N/A Within 10 minutes
Shelf life(10-30℃) 1 year 1 year N/A
Operation and Safety
  • 1. Long term storage of this product may cause some liquid layers to precipitate, which is a normal phenomenon. Please mix well before use.
  • 2. Mix evenly according to the recommended proportion. Excessive deviation or uneven mixing may cause oil discharge, yellowing, and pollution.
  • 3. This product may spill volatile substances during storage, and it is recommended to store it in a ventilated and cool place.
  • 4. The construction personnel must wear gloves, masks or gas mask and other safety protection articles before use, and the construction site must be kept ventilated;
  • 5. It is not recommended to use this product in rainy weather or humid environments.
  • 6. When the product is not used up at once, please seal it tightly and store it in a timely manner.
  • 7. After using construction tools, residual glue should be immediately cleaned to prevent unnecessary waste and loss.
  • 8. It is strictly prohibited to have direct contact with the product with eyes or skin. In case of contact, it should be immediately wiped with paper or cloth, and the affected area should be rinsed with water. If you feel unwell, you should seek medical attention immediately. 9. To ensure construction safety, do not bear weight during the initial stage of adhesive curing.
Color and packaging

Component A: 10Kg, Component B: 1Kg (Component B: 6 barrels/box)

Storage and expiration date

The shelf life of the two components stored separately is 1 year. It is recommended to store the product in a dry and ventilated place and cover it promptly after use.

Data download