利来·国际最老牌官网

Snugbaffle101
2D expansion rubber block

The main material of SnugBaffle101 is butyl/styrene butadiene rubber plastic as the substrate. The product is placed in a small cross-section cavity of the vehicle body, and after being heated and expanded by electrophoresis, the cavity is sealed, blocked, shock-absorbing, and noise reducing. This type of product has good adhesion and corrosion resistance to steel plates.

Product features

The circular circuit formed by the front (A-pillar), middle (B-pillar), rear (C-pillar), and rear door (D-pillar) pillars of the door sill blocks air flow and noise, ensuring the effectiveness of the vehicle's bypass sealing.

Product parameters
Project

Data

Appearance Evenly dispersed, without visible particles to the naked eye

Density(g/cm3)

1.2±0.2

Thickness(mm)

Drawing requirements

Ash content(%)

<30

Volume change rate(%)

>800

Stability(%)

>700

Expansion ratio (times) Normal baking

>10

High temperature baking

>10

Low-temperature baking

>10

Corrosion prevention Non corrosive
Smell No irritating odor
Operation and Safety
  • This product is mainly used for sealing and noise reduction of car body cavities (such as the upper part of the A-pillar, threshold, wheel cover, etc.). Remove the required size of the anti stick paper, adhere it to the application area, and compact it. Pay attention to the surface of the car body steel plate to be pasted, which should be free of impurities such as water, oil, wax, etc. This can obtain a firm adhesion. In order to obtain reliable installation and ensure stable adhesion of self-adhesive expansion sheets, it is necessary to conduct sufficient climate adaptation treatment at room temperature (production line).
Color and packaging

The colors of the expansion film are: black, gray, and blue.

Cut into pieces and package them in cardboard boxes or turnover boxes, or according to customer requirements.

Storage and expiration date

1. Logistics transportation

Requirements for transportation process: ① Avoid high temperatures (below 55 ℃); ② Avoid direct sunlight and exposure to direct sunlight;

2. Standard storage environment

Requirements for product standard storage environment: ① Storage temperature range: -5 ℃~30 ℃; ② Storage humidity range: 30%~80%; ③ Other conditions: Avoid direct sunlight, stay away from heat sources, and place in a cool and dry place;

3. Shelf life: Under standard storage environment, the shelf life is 3 months; The product exhibits performance degradation after being stored in an environment exceeding the standard (temperature 45-65 ℃, or humidity greater than 80%) for a total of 7 days and cannot be used again.