利来·国际最老牌官网

ZJ-TPU800
Two component polyurethane adhesive

ZJ-TPU800 is a two component, room temperature cured polyurethane adhesive with good adhesion, aging resistance, low temperature resistance, and convenient construction. Suitable for bonding various materials such as sandwich boards, metal, rock wool, inorganic boards, honeycomb boards, etc. Widely used in the construction and decoration material industry.

Product features

1. Room temperature curing and self leveling

2. Wide adaptability of substrate and good adhesion performance

3. Low viscosity, convenient construction

Product parameters
Main parameters of ZJ-TPU800

 

 

 

A组分(主剂)

B组分(固化剂)

 

固化前

外观

 

乳白色膏状液体

棕黄色液体

粘度

mPa.s

10000±2000

500±100

密度

g/cm³

1.52±0.05

1.25±0.05

 

 

 

固化后

混合比例

重量比

4:1

混合粘度

mPa.s

2500±500

可操作时间

min

75±25

初始粘结力形成(h/25℃)

h

~6

全固化时

7

拉伸剪切强度(Al-Al)

MPa

>3.5

平面拉伸强度

MPa

≥0.1(无机板粘岩棉)

用量

g/m2

350-500(根据材质可调)

温度适用范围

-40~120

The above data is for reference only, please refer to the measured data.
Operation and Safety
  • usage method:
  • Before using this product, it is necessary to ensure that the surface on which the substrate is bonded must be clean, dry, free of dust and any grease. The main solid mixture should be evenly mixed according to the standard configuration, and can be glued using a serrated scraper, drum, or two component machine. ZJ-TPU800 can cure at lower temperatures (>0 ℃), and the curing time can be shortened by increasing the temperature. During the curing process, it is necessary to maintain a certain pressure on the contact surface to ensure close contact between the two component polyurethane adhesive and both layers.
  • matters needing attention:
  • It is recommended to use automatic mixing equipment to keep the mixer and adhesive parts dry. A. Component B should not come into contact with water or moisture.
  • Mix components A and B in proportion within the operation time, and use them before the gel time.
  • Before curing, the adhesive can be directly cleaned with ethanol, ethyl acetate, etc. After curing, the resin should be soaked, softened, and peeled off with a special cleaning agent.
  • Health and Safety
  • This product information manual does not include product safety information for safety instructions. It must be specifically noted that:
  • Avoid contacting sealant products with food and cosmetics;
  • Uncured adhesive should not come into contact with the skin for a long time. If any discomfort symptoms such as allergies occur, please seek medical attention promptly
  • If the sealant accidentally gets into the eyes, it must be immediately rinsed with plenty of water and then checked by a doctor;
  • Pre test procedure
  • In order to eliminate potential problems on site, Zhijiang samples various materials used for adhesives and pre determines the optimal conditions for use. Please consult Zhijiang technical personnel for details.
Color and packaging

Main agent component: 1000kg/ton barrel

Curing agent component: 25 kg/barrel; 200kg/barrel

Customizable according to customer requirements

Storage and expiration date

Store in a dry, ventilated, and cool place in its original packaging, with a shelf life of 6 months