利来·国际最老牌官网

JS-8100
Single component car lamp adhesive

JS-8100 single component car lamp adhesive is an organic silicone sealant developed specifically for the adhesion and sealing of car lamps, which has good adhesion to most materials.

Product features

1. Easy to use, with good extrusion workability;

2. Good adhesion, able to bond multiple substrates without the need for primer;

3. Neutral curing, non corrosive;

4. Excellent high and low temperature resistance, capable of long-term operation from -60 ℃ to 200 ℃;

5. Excellent weather aging resistance;

6. Excellent electrical insulation performance.

Product parameters
Main parameters of JS-8100

Product

JS-8100 single component car lamp adhesive Testing standards

Appearance

Delicate and even paste gel without scaling visualization

Tack free time(min)

≤30

GB/T 13477

Cure speed(mm/24h)

≥2.0

Tensile strength(Mpa)

≥2.0

 

 

GB/T 528

Elongation at break(%)

≥300

Processing temperature(℃)

-60~200

Test conditions: temperature 23 ± 2 ℃, relative humidity 50 ± 5%. The data in the table is for reference only, please refer to the measured data
Operation and Safety
  • Anticipated matters:
  • Please read the safety manual before use to learn about preventive measures and safety recommendations. For chemicals that do not require labeling, observe in advance and take corresponding preventive measures.
  • Action:
  • The construction site should have a good ventilation system.
  • Surface treatment: The substrate surface needs to be dry and clean to remove stress, static electricity, dust, oil stains, etc.
  • Bonding: Squeeze the gel onto the cleaned surface with a glue gun to distribute it evenly. If the temperature is low, the curing time will be extended.
  • After applying the adhesive, please immediately assemble the components together so that the adhesive can achieve good wetting effect, which will help with the bonding effect.
  • If the assembled components are stored in a dry environment (with a relative humidity of less than 50%), it is recommended to increase the humidity to ensure a suitable curing and crosslinking speed.
  • Cleaning:
  • After a certain period of curing, alcohol or acetone can be used to clean excess adhesive in a timely manner. The fully cured adhesive is difficult to remove and may require long-term immersion in an alcohol solvent to remove.
  • matters needing attention:
  • --Ready to use and do not expose to air for extended periods of time.
  • --Maintain first in, first out use of materials.
  • --Use in a well ventilated area.
  • --Do not eat in the workplace.
Color and packaging

310ML, 20L small bucket, or 200L large bucket.

Storage and expiration date

Recommended storage conditions: Store in a dry and cool place.

Shelf life: 12 months