利来·国际最老牌官网

FT-2000
Weathering resistant silicone sealant

JS-2000 weather resistant silicone sealant for building is a single component, neutral curing, designed specifically for weather resistant and waterproof sealing in building curtain walls. It can be easily extruded and used at -5 ℃ -40 ℃, relying on the moisture in the air to solidify into excellent and durable elastic silicone rubber.

Product features

1. Easy to use: can be squeezed out for use at any time;

2. Neutral curing: suitable for most building materials without adverse reactions or corrosive effects;

3. Excellent adhesion: can form strong adhesion with most building materials;

4. Excellent weather resistance: sunlight UV, rainwater, ice and snow, ozone, and high and low temperatures will not cause adverse effects;

5. Displacement capacity: capable of bearing ± 35% of the interface's telescopic displacement capacity;

6. After curing, maintain good elasticity under environmental conditions of -50 ℃ -150 ℃.

Product parameters
The following data is for reference only

Supplies

Colors: black, white, gray, etc
Performance

Lndicators

Test method

Sag(mm)

0

GB/T 13477.6-2002

Surface drying time (h)
Curing time (humidity 50 ± 5%, temperature 23 ± 2 ℃) 14-21 days
After curing the product at a humidity of 50 ± 5% and a temperature of 23 ± 2 ℃:

≤3

GB/T 13477.5-2002

Hardness, Shore A

35~50

GB/T 531.1-2008

100% constant elongation adhesion

No damage

GB/T 13477.10-2017

Elongation at break%

>200

GB/T 13477.8-2017

Sealant level

35

GB/T 14683

Operation and Safety
  • Surface cleaning: Remove all surface dirt such as grease, dust, moisture, residual sealant, and impurities and pollutants such as assembly accessories and protective coatings that remain at the interface and assembly recesses.
  • Primer: The use of Zhijiang silicone sealant usually does not require the use of a primer. If the adhesive test requires the use of a primer on certain materials, the Zhijiang special primer should be poured onto a non shedding white cloth, wiped onto a thin layer of the surface that needs to be sealed, and allowed to dry before applying the sealant.
  • Covering: The area near the interface needs to be covered to ensure that the sealing work lines are perfect and neat. Do not touch the masking tape on the surface where the sealant is to be applied. After the sealant is applied, it must be repaired immediately before the sealant has peeled. After the repair work is completed, the covering tape must be removed immediately.
  • Gasket materials: open cell polyurethane or closed cell polyethylene foam foam rod and polyolefin materials are recommended. For shallow joints that cannot accommodate foam rods, polyethylene tape can be used instead. These materials play a role in preventing the three sided bonding of the sealant.
Color and packaging

JS-2000 weather resistant silicone sealant for construction provides commonly used standard colors: black, white, gray, and other colors can also be provided according to customer needs. JS-2000 weather resistant silicone sealant for construction is provided to customers in a net capacity of 300 milliliters of plastic pipes, 500 milliliters, and 590 milliliters of aluminum plastic film packaging.

Storage and expiration date

When JS-2000 weather resistant silicone sealant is stored in its original packaging in a dry and ventilated environment at 27 ℃ or lower, the shelf life of JS-2000 products is 12 months from the date of production.

Data download