利来·国际最老牌官网

ZJ-706CV
silicone sealant

ZJ-706CV is a single component room temperature cured dealcoholized silicone sealant, mainly used for the bonding and fixation of relays, electronic components, etc

Product features

1. Easy to use, with good extrusion workability;

2. Good adhesion, able to bond multiple substrates without the need for primer;

3. Neutral curing, non corrosive;

4. Excellent high and low temperature resistance, capable of long-term operation from -60 ℃ to 200 ℃;

5. Excellent weather aging resistance;

6. Excellent electrical insulation performance;

7. D3-D10 has low cyclic content

Product parameters
Main parameters of ZJ-706CV

Product Name

ZJ-706CV­

Colour

White

Curing type Single component dealcohol type

Density, g/cm3

1.40±0.05

Surface drying timemin

5~20

Hardness, Shore A

35~55

Tensile strength, MPa

≥1.5

Elongation at break, %

≥150

Low molecular content(D3~D10),ppm

≤100

Volume resistance, Ω.cm

≥1×1014

Dielectric strength, kV/mm

≥15

Operating temperature, ℃

-60~200

The data in the table is for reference only, please refer to the measured data
Operation and Safety
  • The construction site should have a good ventilation system.
  • Surface treatment: The substrate surface needs to be dry and clean to remove stress, static electricity, dust, oil stains, etc.
  • Bonding: Squeeze the gel onto the cleaned surface with a glue gun to distribute it evenly. If the temperature is low, the curing time will be extended.
  • After applying the adhesive, please immediately assemble the components together so that the adhesive can achieve good wetting effect, which will help with the bonding effect.
  • If the assembled components are stored in a dry environment (with a relative humidity of less than 50%), it is recommended to increase the humidity to ensure a suitable curing and crosslinking speed.
  • matters needing attention:
  • Ready to use and do not expose to air for extended periods of time.
  • Maintain first in, first out use of materials.
  • Use in a well ventilated area.
  • Do not eat in the workplace.
  • Hazard indications/safety recommendations/transportation rules:
  • Wear protective gloves for long-term or repeated contact.
  • Keep away from heat sources/sparks/open flames. No Smoking. Keep the container tightly closed. Use explosion-proof electrical/ventilation/lighting equipment.
  • Transport according to non hazardous materials.
Color and packaging

300ML plastic tube packaging

Storage and expiration date

The product is in a sealed and cool dry condition, with a shelf life of 9 months