利来·国际最老牌官网

ZJ-OP5240
Organic silicon high folding packaging adhesive

This product is a two component high refractive index silicone liquid encapsulation adhesive suitable for SMT packaging such as 3528, 5050 series, etc. It has high adhesion, high transparency, high refractive index (1.54), high strength, and excellent wet thermal stability. Silicone can protect chips and leads by absorbing the stress generated by the thermal cycle inside the packaging. Mainly used for LED chip protection, SMD, Molding, etc.

Product features

1. Excellent adhesion performance to metal materials such as copper, silver, and aluminum, as well as support materials such as PPA and ceramics;

2. High transparency, medium hardness, and good toughness;

3. Excellent anti vulcanization performance;

4. Good weather resistance, excellent cold and heat shock resistance, can be used at - 60~+220 ℃ for a long time.

Product parameters
Main parameters of ZJ-OP5240
Performance before curing

ZJ-OP5240 A

ZJ-OP5240 B

Appearance Colorless Transparent Liquid Colorless Transparent Liquid

Viscosity cp/25℃

3500

2200

Mixing ratio A/B

1:4

Mixed viscosity cp/25℃

2400

Operable time h

>6

Performance after curing (recommended curing conditions: 80 ℃ for 1 hour+150 ℃ for 3 hours)

Hardness Shore D

43

Refractive index

1.54

Transmittance(450nm)

≥95%

Tensile strengthMpa

4.5

Elongation at break

≥50%

Shear strength(Al-Al)Mpa

5.0

The data in the table are typical values and non-standard values. Please refer to the measured data for accuracy
Operation and Safety
  • 1. Usage ratio: ZJ-OP5240 A 1 portion; 4 copies of ZJ-OP5240 B;
  • 2. Mix materials A and B evenly in proportion, and then place them under vacuum for 30 to 40 minutes to remove any residual air from the adhesive to avoid affecting its airtightness;
  • 3. After defoaming, use a syringe or dispensing machine to fill. After filling, proceed to the curing process.
  • 4. Recommended curing conditions: 80 ℃/1h+150 ℃/3h
  • 5. When applying the product, pay attention to wearing labor protection to avoid high temperature burns during the construction process and prohibit consumption.
  • 6. Use this product with caution and pay attention to safety precautions before and during use. In addition, safety regulations stipulated by relevant national or local governments should also be followed. (Please refer to the corresponding MSDS for detailed safety instructions)
Color and packaging

Component A: 500g/bottle; Component B: 2000g/4 bottles

Storage and expiration date

Belonging to non hazardous materials, please store in a sealed and cool dry place, with a validity period of 6 months