利来·国际最老牌官网

ZJ-DR6200PC
Organic silicon thermal conductive gel

ZJ-DR6200PC additive silicone thermal conductive adhesive is a two component product that is soft and compressible after curing. It is mainly used for heat dissipation of heating components such as power batteries and electronic equipment.

Product features

1. Excellent electrical insulation performance.

2. Good thermal conductivity, with a thermal conductivity coefficient of 2W · m-1 · K-1.

3. Can be cured at room temperature or by heating.

4. After application, it does not flow in the horizontal or vertical direction.

5. It is easy to rework after solidification.

6. Flame retardant grade: V-0.

7. The shrinkage of the product is small after curing.

Product parameters
Main parameters of ZJ-DR6200PC
Inspection items Technical indicators Test method
Appearance of component A

White

Visualization
Appearance of component B Blue Visualization

Component A viscosity(Pa·s,10 rpm)

334

GB/T 10247

Group A thixotropy index(2rpm/10rpm)

2.4

/

Component B viscosity (Pa·s,10 rpm)

352

GB/T 10247

Thixotropy index of component B(2rpm/10rpm)

2.3

/

Mixing ratio (weight ratio)

1:1

/

Specific gravity after mixing (g/cm3)

2.1

GB/T 13354

Operable time (min/25℃)

60

GB/T7123.1-2015

Curing time(h/25℃)

4

/

Curing time (h/80℃)

0.5

/

Hardness after curing(Shore00)

55

GB/T 531.1

Thermal conductivity coefficient [ W·m-1·K-1)]

2.07

IS0 22007-2

Breakdown voltage(kV/mm)

11

GB/T 1695

Volume resistivity(Ω·cm)

1.0×1013

GB/T1692

Flame retardant performance

V-0

UL94

Operating temperature(℃)

-50-200

/

The data in the table is for reference only, please refer to the measured data.
Operation and Safety
  • 1. Clean the surface of the substrate from dust, oil, etc. before use.
  • 2. Components A and B should be thoroughly and evenly mixed to avoid affecting curing.
  • 3. The contact of the adhesive with the following chemical substances will cause the adhesive to not solidify: N, P, S organic compounds; Sn, Pb, Hg, As plasma compounds; Containing alkynes and multi vinyl compounds.
  • Hazard indications, safety recommendations, transportation rules
  • 1. Wear protective gloves for long-term or repeated contact.
  • 2. Keep away from ignition sources, sparks, and open flames, keep the container sealed, and use explosion-proof electrical, ventilation, and lighting equipment.
  • 3. This product belongs to non hazardous materials and can be transported as non hazardous materials.
Color and packaging

This product can be provided in 400ml, 600ml double tube packaging or other packaging according to customer needs

Storage and expiration date

This product should be stored in a well ventilated place with a storage temperature below 30 ℃ and a storage period of 6 months.