利来·国际最老牌官网

ZJ-PUR900-1
Polyurethane hot melt adhesive for electronic use

ZJ-PUR900-1 is a 100% solid content, moisture reactive polyurethane hot melt adhesive mainly suitable for bonding various plastics and metals in the electronic industry.

Product features

It can be used for self adhesion and mutual adhesion of plastics such as PC, ABS, PVC, and aluminum, stainless steel, and glazed glass. After the adhesive is coated and cooled, it can provide appropriate strength for subsequent production processes; After complete curing, it can exhibit excellent heat resistance, water resistance, and chemical resistance, especially suitable for the bonding of plastics in the electronic industry.

Product parameters
appearance: Black solid White solid
Density:

1.1±0.05g/cm3

1.1±0.05g/cm3

Solid content:

100%

100%

Melt viscosity (100 ℃):

5000±2000 cps

5000±2000 cps

Opening hours (25 ℃):

2~6min

2~10min

The data in the table is for reference only, please refer to the measured data
Operation and Safety
  • Action:
  • The construction site should have a good ventilation system, and the recommended construction temperature is 100-130 ℃.
  • ZJ-PUR900-1 is a moisture reactive polyurethane hot melt adhesive. Please use professional equipment for reactive hot melt adhesives. If ordinary hot melt adhesive equipment is used, it may cause moisture to seep into the product due to poor airtightness, resulting in solidification of the product. This will damage the adhesive machine or affect its use.
  • After applying the adhesive, please immediately assemble the components together so that the adhesive can achieve good wetting effect, which will help with the bonding effect.
  • In order to achieve complete solidification, it is best to place the product that has completed the process operation in a suitable temperature and humidity working environment (recommended temperature: 23-25 ℃, relative humidity around 65%).
  • It is recommended to fully solidify the assembled electronic products before conducting subsequent related tests.
  • Cleaning:
  • For uncured products, construction equipment can be cleaned with specialized cleaning agents and must be thoroughly rinsed.
  • The fully cured adhesive is difficult to remove and may require long-term immersion in NMP solvent to remove.
  • matters needing attention:
  • --This product is reactive polyurethane. Employees who are allergic to polyurethane products are not recommended to operate.
  • --As the product must be used under high temperature, please be sure to wear appropriate clothing, gloves, protective glasses and other personal protective equipment.
  • --Ready to use and do not expose to air for extended periods of time
  • --Maintain first in, first out use of materials.
  • --Cleaning agents should only be used once and should not be mixed with the product
  • --Do not eat in the workplace
  • Anticipated matters:
  • Please read the safety manual before use to learn about preventive measures and safety recommendations. For chemicals that do not require labeling, observe in advance and take corresponding preventive measures.
Color and packaging

30ml plastic tube, 300ml tube, 25kg barrel